GCL & bentonite · 2026
Shear Behavior of 3D-Printed Embossed Textured Geomembrane and Geosynthetic Clay Liner Interface
Original research · free full-paper access · authors credited
Research overview
Large-scale direct-shear tests at 100, 200 and 400 kPa isolate the effects of embossed asperity height, diameter and spacing using 3D-printed geomembrane prototypes against an air-dry GCL. Taller and more closely spaced asperities generally increased peak and large-displacement strength, but the prototypes are not commercial substitutes and the authors require verification for hydrated GCLs, printed-material effects, creep and hydro-mechanical coupling.
Kontain’s reading note. Refer to the original paper for the authors’ full methods, findings and limitations.
- Authors
- Juan Hou, Shen Lu, Xuelei Xie
- Publication year
- 2026
- DOI
- 10.3390/su182211673
- Access
- Full text at the original publisher or institutional repository.
- Reuse
- CC BY 4.0 ↗
Read the full paper
Use your email and a one-time code for free access. No payment or password required. The paper opens at its publisher or repository.
Read the full paper →Search all research papers →Topics in this paper
Apply the evidence to your project
Materials, test conditions, exposure and loading matter. Research findings need project-specific assessment before use as design inputs.
Kontain provides geosynthetic supply and engineering support. Inclusion in this catalogue does not imply author endorsement or product certification.
