Geobag dewatering · Laminated GCLs · Liner supply & technical supportKontain capability brochure

Early project support · Australia

Understand the pond. Plan the clean-out.

Kontain helps owners and operators work through pond capacity, sludge removal and dewatering before a clean-out package is fixed. We can coordinate suitable survey, testing and dredging specialists, then develop the geobag layout and supply package where testing supports a fit.

Before choosing the method

Establish the quantities and the material behaviour.

A clean-out can start with lost storage capacity, an upgrade, maintenance or valuable material that needs recovering. Survey data, samples and operating constraints provide the basis for comparing workable options.

01

Pond bathymetry & sludge quantities

Arrange specialist depth surveys and review available pond drawings or previous surveys. Sludge thickness and volume estimates need a suitable reference surface, sub-bottom information or physical confirmation, with the uncertainty stated.

02

Sampling & dewatering tests

Plan representative samples for solids, chemistry and conditioning checks. Bench or rapid-drainage tests can help assess geobag suitability, filtrate management and cake handling before a limited field trial.

03

Dredging & clean-out planning

Connect with suitable dredging or earthworks contractors and work through access, pumping, staging and liner protection. Compare geobags with mechanical dewatering, excavation or other practical methods for the actual material and available space.

From enquiry to field work

A practical sequence with clear handovers.

  1. 01

    Review the site

    Start with the operating objective, available records, pond access and water-management constraints.

  2. 02

    Survey and test

    Agree a survey and sampling scope that resolves the quantities and material behaviour needed for planning.

  3. 03

    Develop the method

    Use the results to plan dredging, a limited dewatering trial, pad layout, filtrate return and solids handling.

  4. 04

    Coordinate delivery

    Confirm contractor scopes and operating controls, then supply the selected materials and support implementation.

A depth survey is one input, not the whole answer.

Bathymetry does not establish sludge chemistry, dewatering performance or liner integrity. Sampling and suitable testing answer those questions. Survey method, reference levels, access and uncertainty must suit the pond and the decision being made.

The delivery team

One coordinated scope. Defined responsibilities.

Kontain helps connect the right people and stays involved in the product and technical work. Specialist availability, deliverables and commercial arrangements are agreed for each project.

Kontain

Early feasibility, dewatering options, geobag testing coordination, layout and agreed design inputs, product selection and supply. We remain involved as the scope develops.

Survey and testing specialists

Select and carry out the agreed survey or laboratory methods, report results and limitations, and retain responsibility for their specialist work.

Owner and delivery contractors

Confirm operating requirements, approvals and material destinations. Appointed contractors undertake dredging, pumping and field operations under the agreed scope.

Start early

Send the information you already have.

You do not need a finished scope. A short description, a plan and a few photographs can help establish the first useful step.

Start a project enquiry
  • Site location, pond plan, photographs and any previous surveys
  • Reason for the clean-out and the capacity or material-recovery objective
  • Available sludge data, samples and estimated quantities
  • Liner details, operating levels, access and available dewatering area
  • Required timing, water-return criteria and proposed solids destination