Geobag dewatering · Laminated GCLs · Liner supply & technical supportKontain capability brochure

For asset owners, engineers and contractors

Geobag dewatering and lining engineering.

Custom geobags, defined operating methods, specialist lining components and application-specific material supply. Kontain helps turn project inputs into drawings, specifications and a practical delivery scope.

Rev 1 · 17 November 2026 · 8 pages

Cover of the Kontain technical capability brochureGeobags · GCLs · Lining systems

01 · Kontainer™ Geobags

Design the bag, the pad and the operating method together.

Geobag planning starts with representative slurry data, feed variability, a dry-solids or retained-volume target and the available footprint. Testing helps establish fabric retention, conditioning response and the drainage basis before bag quantities or operating rates are fixed.

  • Custom dimensions, ports, connection details, fabric properties and seam requirements.
  • Single-layer or stacked layouts, pad levels, setbacks, access, manifolds and filtrate collection.
  • Fill-height and pressure checks against geometry, slurry density and fabric/seam strength.
  • Fill, drain and refill cycles, polymer starting settings, hold points, monitoring and contingency actions.

Geobags can also be assessed as a permanent containment-landform core or part of staged capping over soft ground. These applications need foundation and settlement checks, with liner, drainage and barrier layers designed as separate systems.

Concept capacity is not an operating guarantee. Stacking needs project-specific bearing, settlement, stability, drainage and sequencing checks. Throughput, filtrate quality and final solids content depend on the material and field operation.

Explore geobag design and supply →

02 · Lining component engineering

Resolve the layers and interfaces around the project duty.

Kontain works alongside the appointed lead designer on defined lining components and technical submissions. The design basis includes geometry, ground conditions, loading, contained liquid, exposure and the project acceptance criteria.

  • Leakage assessment and geonet or geocomposite drainage under the relevant load and gradient.
  • Anchor-trench geometry, liner loads, soil resistance and pull-out checks.
  • Cover-soil veneer stability using appropriate interface shear strength and water pressures.
  • Exposed-liner wind uplift and ballast, protection, penetrations, sumps and transitions.

Calculations, details and specifications are coordinated with the overall civil design. Kontain takes responsibility for its agreed specialist scope; the lead designer resolves wider facility interfaces and certification requirements.

Explore lining design and technical support →

03 · Laminated GCLs

Specify the barrier construction and the installation basis.

Laminated geosynthetic clay liners combine a bentonite barrier with a polymer layer. Selection needs more than a nominal thickness: the bentonite, carrier textiles, laminate, overlaps and surrounding layers must suit the containment or capping application.

  • Bentonite type, dry mass and formulation, including assessment of polymer-modified options where appropriate.
  • Polymer laminate construction, roll formats, joint arrangements and field details.
  • Liquid compatibility, hydraulic performance, hydration, confinement and exposure conditions.
  • Installation guidance and evidence required for acceptance of the selected system.

Unlaminated, laminated and weldable composite arrangements have different details and verification needs. Product selection follows the project conditions and current technical evidence.

Review laminated GCL systems →

04 · Material customisation

Configure supply for handling, installation and performance.

Kontain works with manufacturers on HDPE and LLDPE geomembranes, GCLs, geotextiles and drainage composites. Product configuration is considered alongside the contractor’s deployment plan and the agreed testing requirements.

  • Resin, formulation, thickness, surface texture and available colour or conductive options.
  • Manufacturing route, sheet tolerances, roll width, length and mass.
  • Core material, diameter and strength for lifting, transport and deployment.
  • Protection geotextiles and drainage layers selected for the aggregate, pressure, interface and long-term flow requirement.

Availability, manufacturing feasibility, minimum orders and lead times are confirmed at quotation. Technical data and manufacturing benchmarks do not replace project-specific compatibility, interface, cushion or drainage testing where needed.

Explore custom product configurations →

Tender, design development and construction

Technical deliverables to match the scope.

DeliverableTypical content
Design basis and calculationsFeed range, dry-solids or retained-volume targets, operating duty, material properties and site constraints; scoped geobag or lining-component checks.
Drawings and quantitiesBag layouts, plans and sections, port and hose corridors, pad and drainage details, lining interfaces, material schedules and tender take-offs.
Material and operating specificationsFabric, seams, liner layers and acceptance evidence; conditioning basis, filling limits, staged release criteria, monitoring and response actions.
Quality and construction supportTraceable product submissions, testing coordination, agreed site conformance reviews, technical queries and close-out records.

The proposal defines required inputs, deliverables, issue status, review requirements and exclusions. Example drawings and calculations illustrate capability; their dimensions and operating limits are not transferable to another site.

Specialist project support

Connect the design with surveys, testing and field delivery.

For a pond clean-out, Kontain can coordinate bathymetric/sludge assessment, representative sampling and dewatering trials, then help connect the project with a suitable dredging contractor. For lined assets, we can help arrange inspections, electrical leak location, repair or installation contractors and separately appointed independent CQA.

Survey and test methods are selected by the relevant specialist. Bathymetry does not establish sludge chemistry or locate liner leaks. Periodic conformance reviews cover the work observed and records reviewed; they do not replace required testing or continuous supervision.

Current technical capability

Keep the eight-page brochure with your project brief.

Geobag fabrication, layout and operation; lining components and customised materials; drawings, testing and specialist coordination.

Download PDF · Rev 1 ↓